AMARK 355
| Parameter Specification | 8W-500K |
| Wavelength (nm) | 355 |
| Average Power (Watts) | >8W @ 500KHz |
| Pulse Energy (µJ) | >16 |
| Specified Frequency (kHz) | 500 |
| Repetition Rate Range (kHz) | 300 ~ 1000 |
| Pulse Width (ps) | <20 |
| Beam Quality (M²) | <1.3 |
| Beam Roundness (%) | >90 |
| Beam Diameter (mm) | <3 |
| Divergence Angle (mRad) | <1.5 |
| Pointing Stability (µrad/°C) | <20 |
| Polarization Ratio | 100:1 Linear, Horizontal |
| Pulse Stability (%RMS) | <2 |
| Average Power Stability (% over 12 hours) | <3 |
| Cold Start Warm-up (mins.) | <40 |
| Standby Warm-up (mins.) | <15 |
| Ambient Temperature (°C) | 20-35°C |
| Ambient Humidity (%) | 20 to 80, Non-condensing |
| Storage Temperature (°C) | -10 to 60 |
| Storage Humidity (%) | 20 to 80, Non-condensing |
| Power Supply Requirement (VDC/Watts) | 24±5%/600 |
| Average Power Consumption (W) | < 400 |
| Communication Protocol | RS232 |
| Cooling Method | Water |
| Weight (kg) | 22 |
AMARK series industrial picosecond lasers provide compact integration, POD function, BURST mode, and full status monitoring. Perfect for 3C marking, packaging marking, FPC/PCB marking, with 1064, 532, and 355nm wavelengths.
Product Pictures
Product Introduction
The AMARK series is a compact and high-performance picosecond laser specially designed for industrial marking applications. Featuring a small footprint for easy integration, it supports POD functionality and BURST mode with 1-10 selectable pulses. PWM wave and analog voltage control allow precise power adjustment.
AMARK lasers offer simplified electrical interfaces, with a 24V power input and a 15-pin signal interface that integrates RS232 communication, making device integration effortless. Multiple trigger modes, including high/low level and rising/falling edge, enable flexible pulse triggering (POD).
Equipped with automatic point switching, power display, status monitoring, and intelligent diagnostics, AMARK ensures full control and real-time feedback. Ideal for 3C marking, packaging marking, and FPC/PCB marking, the AMARK series delivers excellent stability, ease of use, and superior marking precision.
Application Cases
UV Picosecond
P-Coating Film Cutting
Smartphone Antenna Cutting
OLED Cutting
